Underfloor Heating Not Working in Pimlico: Causes and Next Steps

Published:2026-10-12

i 3 Table Of Content

Underfloor heating that has gone cold in places in Pimlico is frustrating because you can’t see the cause. Most faults are at the manifold, thermostats or heat source, not in the floor. Call 02071834810 and our engineers will test it.

Need help in Pimlico? Our engineers cover Pimlico. Call 02071834810.

We work in Pimlico and the streets around it throughout the year, so we know the sort of homes and systems you are dealing with. Here is what is worth knowing before you call.

Need a Gas Safe engineer?

Callouts across Central and West London. Free quote, no call-out charge.

What we see in Pimlico homes

Pimlico is known for its grid of white stucco Regency-style terraces, many now converted into flats, with mansion blocks and post-war developments nearby.

Period houses and townhouses in Pimlico

Underfloor heating in period houses is often a later addition in extensions, basements or kitchens, sitting alongside radiators on the original system. Faults commonly come from how the two were joined, so we look at the whole arrangement.

Converted flats and rentals in Pimlico

Converted flats with underfloor heating usually have it in a refurbished kitchen or bathroom, with a small manifold or electric mats. Cold patches there often trace back to controls or a single zone.

Mansion block flats in Pimlico

In mansion block flats, underfloor heating is usually electric or served by the building’s own system, and access to the controls matters. Starting at the thermostat and controls is the usual way to find a fault.

Our engineers regularly attend homes around Warwick Way, Lupus Street and Eccleston Square. When a call comes in from Pimlico (SW1V), we test the manifold, controls and heat source, and we explain what we find in plain English before any work starts.

What underfloor heating problems look like

  • Some rooms or zones warm up and others stay cold
  • Cold patches or stripes across the floor
  • The system takes much longer to warm up than it used to
  • Heating cycles on and off, or the controls seem to ignore settings
  • Bills have crept up without a change in how you use it

What we do on a visit

We test rather than guess: checking the heat source, pump, mixing valve and manifold, measuring flow and temperatures across each loop, and checking the controls and thermostats. Because the work is at the manifold and the controls, floors stay down and you don’t lose your finish. We explain what we’ve found in plain English and give you a clear price for putting it right before we start. Where gas appliances are involved, our Gas Safe registered engineers do that part.

What’s urgent and what can wait

If there’s a water leak, a smell of gas, an electrical smell or any sign of overheating, switch off and call us immediately. See our smell of gas guide. A cold zone with everything else working can usually wait for a booked visit, but a system that’s underperforming is wasting energy, so it shouldn’t wait for months. Water leaking from a manifold or beneath a floor is a job for our Plumber London engineers as well.

Likely causes, in plain English

Air or poor flow in a loop

Wet underfloor heating runs water through loops of pipe. If air gets into a loop, or flow isn’t balanced between loops, you’ll get cold zones. Getting flow right across the manifold takes the right equipment and understanding of the system. For a survey or servicing, see our underfloor heating service Pimlico page.

A problem at the manifold

The manifold is the distribution point where the loops connect. Valves, actuators and flow meters can stick or fail, which leaves a zone cold while the rest works. It’s where most faults are found, and it’s accessible without disturbing the floor.

Thermostat or control faults

Room thermostats, wiring centres and actuators control which zones heat. A failed thermostat or actuator can make a room seem dead. Controls are mains-powered and shouldn’t be opened up by anyone who isn’t qualified.

Mixing valve or pump issues

Underfloor systems usually run at lower temperatures than radiators, so they use a mixing valve and a pump to manage it. If either fails or is set wrongly, rooms will underperform or take hours to warm up.

Electric systems

Electric mats and cables can fail through a damaged cable, a thermostat fault or a wiring issue. These need testing by a qualified person. The thermostat is the first place we look.

Don’t try to drain, bleed or adjust an underfloor heating manifold yourself, and never open electrical controls. Water and electrics together are a danger. Call 02071834810 and our engineers will attend.

Servicing underfloor heating regularly

A yearly service at the manifold, the pump and the controls is the best way to avoid cold spots. We check flow, temperatures and the condition of the water, and catch small faults before they affect comfort or bills. If you’ve recently had work done, such as a new floor, a new boiler or alterations to the pipework, it’s worth having the system checked afterwards.

What it costs to leave it in Pimlico

Delaying rarely saves money. A fault caught early is usually a smaller job, while one left to get worse can damage other parts, push up your bills or leave you without heating or hot water in the coldest weeks, when engineers are busiest. What you pay depends on the cause, the make and model, how easy it is to get at and which parts are needed. We give a clear price once the cause is confirmed, before any work starts.

Working across Pimlico

Many Pimlico buildings are in conservation areas and some are listed, and flat conversions mean shared pipework and managing agents, so we check access and building rules first. We cover Pimlico and nearby areas including Victoria, Westminster and Chelsea, with appointments subject to availability, including emergency call-outs.

Why a Gas Safe registered engineer

The law requires anyone working on a gas appliance to be on the Gas Safe Register, and you can check any engineer on the Gas Safe Register website. Our engineers carry their ID cards and will show them without being asked. You also get written confirmation of the work and clear warranty terms.

Living nearby? We cover the surrounding streets too, so see our guides on underfloor heating not working in Westminster, underfloor heating not working in Chelsea and underfloor heating not working in Victoria.

Frequently asked questions

Do you give a clear price?

Yes. Service visits come with a free quote and any extra work is quoted before we start.

Will you need to lift my floor?

Almost never for diagnosis and servicing. Most faults are at the manifold, thermostats or heat source.

Do you work in period and listed buildings in Pimlico?

Yes. Many period homes in Pimlico have features or rules that affect where pipework and flues can go, so we check what’s allowed before work starts and plan the job to protect the property.

I rent my flat in Pimlico. Who arranges the visit?

Usually your landlord or letting agent, and we’re happy to deal with either, or with you directly. If you’re the landlord, we can coordinate with your tenant.

Do you cover Pimlico?

Yes. We cover Pimlico and nearby areas including Victoria, Westminster and Chelsea, with appointments subject to availability, including emergency call-outs.

Book a visit in Pimlico

Underfloor Heating Not Working in Pimlico? Call 02071834810 for a free quote with no call-out charge.

About the author
Peyman

Peyman

CEO & Founder — Gas Safe Registered Engineer

Peyman is the founder of Olia's Plumbing & Heating, a London based team working in boiler installation and repair, central heating, gas work and emergency plumbing. He personally oversees jobs across Central and West London and writes these guides to help homeowners understand their heating systems.

  • Gas Safe Registered
  • Covering all of London
Need a plumber in London?
Call now Get a quote